If you are experiencing trouble with the set-up or running of a MLogger, please refer to these videos. They are short, direct, and may be able to answer whatever questions you may have. If you are still experiencing trouble after viewing these videos please call our office for further assistance.

»Rig Up

How to rig up an MLogger’s gas lines and network connectivity
How to rig up MControl to connect to MLogger
How to use the 20 Pin connector, and the removeable antenna

»Chromatograph Calibration (Red and Yellow box only)

How to calibrate the chromatograph with the Integration Method
How to calibrate the chromatograph with the Peak Height Method

»Total Gas Calibration (Blue, Red and Yellow box)

How to calibrate the total gas with 1% methane
How to calibrate the total gas with 100% methane

»CO2 calibration (Yellow box only)

How to setup and calibrate the CO2 detector w/ 10% CO2
How to calibrate the CO2 detector to read 0 – 100% CO2 using the dilution flowmeter

»Remote connectivity to MLogger

How to connect to MLogger remotely
More coming soon...	Coming Soon....

»Troubleshooting

Unable to get to the internet, even though its plugged into the WAN port on the MLogger?
How to resolve WITS Status Error
Total Gas is stuck on 440, 480 or some large number in MControl
How to change out a filament on a TC MLogger (Blue)
How to change out a filament on a TGC MLogger (Red)
How to turn off your firewall