How do I hook up a depth pulse signal from TOTCO, PASON, etc.?

Thursday, 08 May 2014 19:56 John Thai
Print

How do I hook up a depth pulse signal from TOTCO, PASON, etc.?

______________________________________________________

A:

1. Get a depth pulse with a switch closure and hook it up to your conventional depth channel

2. In WISE, click Edit → Configure Variables

a. Click the Configure Variable tab and select the "Pump_6" variable from the pull down variable list.

b. Change the Raw Input ID to 1201.

c. Click Save → OK → OK.

d. You should see Pump_6 increase for every switch closure.

3. Click File → Import → Formulas

a. Select the "EncoderCount" variable from the pull down variable list.

b. Type Pump_6*-1 exactly into the Imported Formula text box.

c. Click the Import button and Close.

4. Click Setup → Depth → Configuration

a. Click the Linear tab.

b. Enter 1 into the Counts Per Foot text box.

c. Click the Calibrate button and Close.